Vertical Turbine Pump

The V-Smart BIC-V Borehole Injection Control Valve™ is designed for use on both submersible and vertical turbine pumps. For vertical turbine pumps, the line shaft extends straight through full bore internal diameter of the V-Smart BIC-V™ valve, which sits above the pump bowls in the column pipe string. During injection, water flows through the center of the valve, around the pump line shaft, and exits the valve through the machined injection ports. Based on the well data provided, these ports are carefully sized and custom-machined to provide the best control characteristics. The outer sliding sleeve is hydraulically actuated to slide up and expose the injection ports, with the total required valve stroke being determined by the desired injection flow rate. During pumping operations, the valve sliding sleeve is actuated fully closed, allowing recovery pumping to pass up through the center of the valve to the surface.   Because the V-Smart BIC-V™ is designed with a full-port internal diameter, it allows for very low head loss during pumping operations, while remaining compact in size to fit into smaller casing ID’s. This helps keep the pump within an energy efficient range on the pump curve. Depending on required flow rates during injection and recovery pumping, the V-Smart BIC-V™ valve is often sized one or two sizes smaller than the adjoining column pipe.

*The V-SMART, BIC-V, BOREHOLE INJECTION CONTROL VALVE, ASR RESOURCES and the WAVE logo are trademarks owned by ASR Resources, LLC.